Zip HydroTap All In One Residential Model: DOMSAN4 - Boiling, Chilled And Sparkling Filtered Water Instantly, Plus Hot And Cold Water Mixer Tap

Zip HydroTap DOMSAN4

With new Zip G4 power-saving technology and Zip 0.2 micron filtration.

Boiling and chilled filtered water instantly, plus “sparkling” chilled filtered water instantly and hot and cold water, from a single tap. “Non-vented mixer tap” model connecting to incoming cold water and hot water supplies.

Saving energy

User Safety

Healthier drinking

Buy Zips Residential G4 HydroTap Online From The Uk's Largest Zip Authorised Dealer

For more details and to buy online, please visit the Zip HydroTap G4 Residential All In One section on our main website or click on the links below
(Opens new window).

Zip HydroTap G4 Residential All In One Sparkling Avaliable In Polished Chrome, Satin Chrome, Gloss Black And Matt Black

Zip HydroTap DOMSAN4 Chrome Zip Hydrotap FL1100KIT Zip FL1100 Replacement Filter Zip ZT402 91290 Filter

Typical specification

All-in-One under-sink boiling, chilled and sparkling filtered water appliance equipped with two way lever action electronic tap head and the ability to provide hot water for sanitary use to the same outlet. Integral 5 bar pressure limiting and Dual Check valve, NSF certified 0.2 micron filter. Full colour interactive touch screen display with pin code protection, 2 boiling water safety modes, 3 energy saving modes including a sensor activated “sleep when its dark” feature and upgradable boiling water capacity with additional “Booster” module.

Watch Our Zip HydroTap G4 Video


Five Year Warranty

Appliance warranty 24 months, plus additional 36 months boiling tank warranty.

Installation

Boiling System: Open outlet, vented system, factory set to operate at 98°C.
Flow rate 4.0 l/min.

Chilling System: Fan-cooled condenser type, factory set to operate at 5-9°C.
Chilled Flow rate 4.0 l/min.
Sparkling Sparkling 1.8 l/min.
Refrigerant R134a.

Location: Tap should be positioned so it drains into a suitable sink. Alternatively tap can be installed away from any sink on it own ‘font’. Tap should be situated as closely as possible to directly above the under-sink Command Centre.
Maximum distance from the base of the tap to the Command Centre is one metre. Command Centre must have clearances as shown on the drawings.
Ventilation accessories (supplied) must be installed as per instructions.

Plumbing: Must be installed In accordance with UK Water Supply Regulations.
Designed for direct connection to a potable (drinkable) cold water supply with a minimum pressure of 0.7 bar (1.7 bar if fitted with booster unit or scale filtration).
A 5 bar pressure limiting valve is fitted internally.
An isolating valve should be installed between the water supply and the Command Centre.

Electrical: Installation must comply with current lEE regulations.
To be wired to a double pole 13 amp fused spur.
ZT011 Booster requires a separate fused spur.

Limescale Prevention - IMPORTANT: In hard water areas where mineral scale accumulation may be an issue, consideration should be given to the maintenance required.
We recommend use of the Zip Professional high performance Limescale Filtration System.

Carbon Dioxide: The disposable CO2 gas cylinder (supplied) must be secured in an upright position in a ventilated area not less than 38 cubic metres. Each cylinder contains 1kg of CO2.

Dimentions

Zip Residential HydroTap DOMAN4 Specification

Contact Us Today

For more information give us a call on 01462 851103.