Zip HydroTap All In One Vented And Non-Vented HT1713UK (AN160/175G4), HT1714UK (AN240/175G4), HT1716UK (AV160/175G4) And HT1717UK (AV240/175G4)

Zip HydroTap All In One

Boiling and chilled filtered drinking water, instantly, PLUS hot, cold or mixed warm water – All from the one tap!

Features

Superior energy saving features

Buy Zips Commercial All In One HydroTap Online From The Uk's Largest Authorised Zip Dealer

For more details and to buy online, please visit the Zip Hydrotap Commercial All In One section on our main website or click on the links below
(Opens new window).

Zips Commercial Range Of All In One Hydrotaps And Filtration

Zip Hydrotap AN160/175G4 Zip Hydrotap AN240/175g4 Zip Hydrotap AV160/175G4 Zip Hydrotap AV240/175G4
Zip Hydrotap FL2300KIT Zip Hydrotap FL3600KIT Zip Hydrotap FL6000KIT Zip FL2300 Replacement Filter
Zip FL3600 Replacement Filter Zip FL6000 Replacement Filter Zip ZT402 91290 Filter Zip ZT006 Drainless Font

Technical Features

Installation Requirements

Location: The Zip HydroTap All-in-One Commercial System is designed to service one or two sinks. Requires a 50mm hole for tap installation.

Plumbing: Should be installed by a competent person in accordance with the fitting instructions supplied and UK Water Regulations.
Water supply must be potable (drinkable) with a minimum pressure of 2 bar. If pressure exceeds 7 bar a pressure limiting valve must be fitted.
The under sink system must be located within 1 metre of the tap. Under sink connection tubing to the tap must be taut for proper drainage and never be looped or coiled. An isolating valve should be installed between the mains supply and the system.
An isolating valve (not supplied) should be installed between the water supply and the under sink system.

Electrical: Should be installed by a competent person in accordance with the fitting instructions supplied and UK Electrical Regulations. System should be connected to a convenient 13A fused spur. Power supply 220V to 240V AC 50 Hz.

Clearances: The under-sink system must be installed with clearances of 50mm left and right, 200mm above and 65mm rear.

Filtration: Integral sub-micron filter easily accessible for replacement.
Note that use of this filter in locations with excessively high levels of sediment in the water supply may significantly reduce filter life. In such situations a 5 micron filter may be substituted.
In hard water areas where mineral scale accumulation is an issue consideration should be given to the maintenance required. We recommend the use of the Zip Professional Range of scale filtration systems.

Ventillation: IMPORTANT. It is essential that the cupboard containing the undersink unit is adequately ventilated as poor circulation will adversely affect the performance of the HydroTap. Cupboard doors must be offset all round using the 4mm buffers provided.
The under-sink system must be installed with service access clearances of 50 mm left and right, 220 mm above and 65 mm rear. In addition the supplied vent should be fitted in the door or cupboard side wall to dissipate heat to the adjoining area. Where ventilation is limited, it is strongly recommended that the optional auxiliary fan REF: SP90651 is used – always use with BC200/175+AV (supplied as standard).

Warranty: 12 months on site parts and labour warranty. For full warranty details please visit www.zipheaters.co.uk.

All In One Vented Installation Diagram

Zip HydroTap All In One Vented Installation Diagram

All In One Non Vented Installation Diagram

Zip HydroTap All In One Non Vented Installation Diagram

Contact Us Today

For more information give us a call on 01462 851103.